Manufacturer and Exporter of Wire Drawing Machine, Furnaces, Tabular Stranding Machine, Rod Breakdown Machine, India


French Version
Spanish Version

Wet Drawing Machine (Fine)

Check Out More Machines

Wet Wire drawing machine for Low, High Carbon Wires, Stainless Steel and Non Ferrous Wires.

Intermediate Machine • Medium Fine Machine • Fine Machine

Technical Characteristics

•	Continous Coiler

•	Dry Drawing Machines

•	Tubular Stranding Machine

•	Rod Break Down - Wet Drawing

•	Wet Drawing Machines

•	Galvanising Plant

•	Vertical Drop Coiler

•	Rigid Stranding Machine

•	Butt Welding Machine

•	Nail Machine

•	Horizontal Spooler Machine

•	Flattening Machine

•	Pointing Machine

•	Pointing & Threading Machine

Type	NF Inter Machine	F Inter Machine	SS Inter Machine	NF Medium Fine Machine	F Medium Fine Machine	SS Medium Fine Machine	NF Fine Machine	F Fine Machine	SS Fine Machine
Model	WWD-7/9/11/13/15NF/I	WWD-11/13/15F/I	WWD-15/17/SS/I	WWD-19/21NF/MF	WWD-15/17F/MF	WWD-17/21SS/MF	WWD-21NF/F	WWD-21F/F	WWD-21SS/F
Material	Cu./AI.	M.S./H.C.	SS	Cu.	M.S/HC	SS	Cu.	M.S./H.C.	SS
Inlet Wires Dia (mm)	3.2/4	2.5/2	2	2	1.6/1.2	1.2	.7	.7/.5	.5
Finishes Wire Dia (mm)	.4/.6	.4/.4	.4	.2	.15	.25	.122	.1	.122
No. of Dies	7/9/11/13/15	11/13/15	15/17	19/21	15/17	17/21	21	21	21
No. of Cone Blocks	2/2/2/4/4	2/4/4	4/4	4/4	4/4	4/4	4	4	4
Working reduction %	20.6	14.5	12	20.6/18	14.5	13	17	13	13/10
Basic reduction %	19	13.5	12	19/17	13.5	12	16	12	12/9
Finishing Speed (m/sec)	10/12/15	8/10/12 /15	3-5/5	15/20	10/15	5-6	20-25	15-20	10
Drive Trans	Gears	Gears	Gears	Gears	Gears	Timer Belt	Timer Belt	Timer Belt	Timer Belt
Main Drive (k.w.)	22.5/30/ 40	30/40	18.5/ 22.5	18.5 / 22.5	22.5/ 30	11	15	15	5.5
Control AC/DC/ Inverter	As Per Specs	As Per Specs	As Per Specs	As Per Specs	As Per Specs	As Per Specs	As Per Specs	As Per Specs	As Per Specs
Largest Step Dia	250	250	300	200	225	200	150	150	150
Extractor Capstan Dia	250	250	300/250	200	200	200	150	150	150
Cone Material	H.C.H.C./T.C.	T.C./ H.C.H.C.	H.C.H.C.	H.C.H.C. / T.C./Ceramic	T.C. / H.C.H.C.	H.C.H.C.	H.C.H.C. / Ceramic	T.C. / H.C.H.C.	T.C. / H.C.H.C.
Spooler	Ind. Drive	Ind. Drive	Ind. Drive	Ind. Drive	Ind. Drive	Integral Drive	Integral Drive	Integral Drive	Integral Drive
Bobbin Size mm (din spec)	400	250	250	200	250/200	200	160-200	160-200	160-200
Abbreviation Used • NF - Non Ferrous • F - Ferrous • RBD - Rod Break Down • Inter - Intermediate • Ind. - Independent