Single- block wire drawing machines (Inverted/Gravity Blocks)

Inverted - block wire drawing machines can be supplied in various model sizes . According to purpose of utilization they can be used as a take up capstans also.the advantage of using inverted blocks lies in their ability to produce wires in a higher coil weight and comparatively with a smoother finish and mark free wire.

Inverted Blocks

Tract. forces upto 10 00 kN
Capstans 600 - 1200mm Ø
Wire inlet . 5.5.0 - 30 mm Ø






The machine body is executed in heaviest mild steel construction.
The capstan is made of a special cast and surface treated in the accumulation area to achieve a longer durability.
The capstans are driven by very efficient helical bevel/heli worm gear systems.Pressure rollers made up of special alloy steel is provided to effectively clamp the wire while drawing

The capstans may be executed as::

finishing capstans, to accumulate the finished wire, arranged to be taken off by a rotating trolley placed below the inverted capstan.

The capstans and the drawing dies are water cooled. The die holders are combined with lubricant boxes and are adjustable in order to exactly regulate the wire running direction.
The machine is driven by three phase motors in standard execution. Different drawing speeds can be achieved by AC frequency drives.

The electrical equipment is delivered in a separate switch cabinet, completely wired and programmed